Page 1
USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
Page 3
We reserve the right to change specifi cations without notice. All trademarks used in this user manual are the property of their respective owners. ® ® As an ENERGY STAR Partner, iiyama has determined that this product meets the ENERGY STAR guidelines for energy effi ciency.
DIMENSIONS : ProLite B2008HDS ..........27 DIMENSIONS : ProLite E2008HDS / ProLite E2008HDD ...27 COMPLIANT TIMING ..............28 We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com...
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fi re or electric shock.
Page 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
Power Switch for hours. Contact your dealer or iiyama service center for the backlight replacement when the screen is dark, fl ickering or not lighting up. Never attempt to replace it by yourself.
CHEKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama offi ce.
FITTING AND REMOVAL OF BASE : ProLite E2008HDS / ProLite E2008HDD Put the monitor on a stable surface. The monitor may cause injury or damage if it CAUTION falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. ...
CONTROLS AND CONNECTORS : ProLite B2008HDS <Front> <Back> Power Indicator NOTE Blue: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal. Power Switch ( Menu / Select Button (ENTER) Scroll Up / Brightness Button (...
CONTROLS AND CONNECTORS : ProLite E2008HDS / ProLite E2008HDD <Front> <Back> Power Indicator NOTE Blue: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal.
An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama offi ce.
An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama offi ce.
Change to the desired signal timing listed on page 28: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista/7 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2008HDS For optimal viewing it is recommended to position yourself directly opposite to the full face of the 5° 20° monitor, then adjust the monitor’s height and 100mm angle to your own preference. ...
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 28. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 18 for SCREEN ADJUSTMENTS.
ADJUSTMENT MENU CONTENTS Auto Adjust Only Analog Input Adjustment Item Problem / Option Button to Press Adjust H. / V. Position, Pixel Clock and Phase Auto Adjust * Direct automatically. * For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 18 for SCREEN ADJUSTMENTS.
Page 18
Geometry Only Analog Input Adjustment Item Problem / Option Button to Press Too left H. Position Too right Too low V. Position Too high Too narrow Pixel Clock Too wide Phase To correct fl ickering text or lines Color Adjustment Item Problem / Option Button to Press 9300K...
Page 19
Language Adjustment Item Problem / Option Button to Press Español English English Spanish Dutch Français French Nederlands Language Japanese Deutsch German Italiano Italian Simplifi ed Chinese Polski Polish Russian Recall Adjustment Item Problem / Option Button to Press Factory-preset data is restored. Recall All Return to Menu.
Page 20
Miscellaneous Adjustment Item Problem / Option Button to Press 1 2 3 4 5 Sharpness You can change the picture quality from 1 to 5 (sharp to soft). Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order.
Page 21
Input Select Adjustment Item Problem / Option Button to Press D-sub Select the Analog input. Input Select Select the Digital input. When only one of the two signal inputs is connected to the signal source, the one connected NOTE is automatically selected. Input Select function is not available if there is no signal input from the selected connector or during the power management mode.
If the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama. com).
Page 23
Press the Auto Button. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a fl icker or blur, or the picture does not fi t in the display area after performing the Auto Adjust. Adjust the V.Position so that the top and bottom of the picture frame will fi t to the display area.
Page 24
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern. In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and NOTE G because the Clock may not be adjusted correctly. If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.
POWER MANAGEMENT FEATURE The power management feature of this product complies with power saving requirement of ENERGY ® STAR and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. Problem...
The Audio Cable is properly connected. A strange noise is heard. RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling. TROUBLESHOOTING / RECYCLING INFORMATION 23...
APPENDIX SPECIFICATIONS : ProLite B2008HDS Size Category 20" LCD Panel Driving system a-Si TFT Active Matrix Size Diagonal: 20" (50.8cm) Pixel pitch 0.2768mm H × 0.2768mm V Brightness 250cd/m (Typical) Contrast ratio 1000 : 1 (Typical), ACR Function Available Viewable angle Right / Left : 80 degrees each, Up / Down : 80 degrees each (Typical) Response time...
SPECIFICATIONS : ProLite E2008HDS Size Category 20" LCD Panel Driving system a-Si TFT Active Matrix Size Diagonal: 20" (50.8cm) Pixel pitch 0.2768mm H × 0.2768mm V Brightness 250cd/m (Typical) Contrast ratio 1000 : 1 (Typical), ACR Function Available Viewable angle Right / Left : 80 degrees each, Up / Down : 80 degrees each (Typical) Response time 2ms (Gray to Gray)
SPECIFICATIONS : ProLite E2008HDD Size Category 20" LCD Panel Driving system a-Si TFT Active Matrix Size Diagonal: 20" (50.8cm) Pixel pitch 0.2768mm H × 0.2768mm V Brightness 250cd/m (Typical) Contrast ratio 1000 : 1 (Typical), ACR Function Available Viewable angle Right / Left : 80 degrees each, Up / Down : 80 degrees each (Typical) Response time 2ms (Gray to Gray)