Samsung SCD-1080P User Manual page 27

troubleshooting
TROUbleshOOTING
If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the
problem, contact an authorized technician.
PROBLEM
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface of the
camera is hot.
The DAY/NIGHT function does
not work.
Color is not correct.
The screen flickers continually.
When coaxial communication is not
available
 Check that the power cord and line connection between the camera and monitor
are fixed properly.
 Check that you have properly connected VIDEO cable to the camera VIDEO output
jack.
 Is the lens stained with dirt? Clean your lens with a soft, clean cloth.
 Check the monitor and DVR settings.
 If the camera is exposed to very strong light, change the camera position.
 Adjust the contrast feature of the monitor or DVR.
 If you have an intermediate device, set the 75Ω / Hi-z properly.
 Check that you have properly connected the camera to an appropriate power
source.
▶ Check that AGC of EXPOSURE SETUP menu is 'OFF'.
 Check the setting of WHITE BAL SETUP menu .
 Check that the camera is not pointing at the sun.
Make sure that the camera and monitor are installed within the recommended
distance.
 Use the video amplifier equivalent to coaxitron if the recommended
installation distance is exceeded.
SOLUTION
English_27