Samsung SCD-1080P User Manual page 25

 pRIVACy : Mask an area you want to hide on the screen.
1 When the SPECIAL menu screen is displayed, press
the Function Setup switch so that the arrow indicates
'PRIVACY'.
2 Set up the mode using the Function Setup switch.
- AREA : You can select up to 4 PRIVACY areas.
- MODE: Determines whether to use the area selected.
- MASK COLOR: Determine area color. You can select
GREEN, RED, BLUE, BLACK, WHITE and GRAY.
- SEL POS/POS :Adjust the size and position of the selected
area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
 syNC : In areas where the supply is at 50Hz(PAL), you
can synchronize the output phase of multiple cameras
using the power synchronization function (Line-Lock)
without using a synchronization signal generator.
- INT: Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
nPress the Function Setup switch.
Y You can select a desired phase from 0 to 359 when select 'phase'.
M
When using AC power at 50Hz(PAL) frequency, you can use the L/L type synchronization.
`
When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
`
 ReVeRse : You can reverse the picture.
- OFF : You don't reverse the picture.
- H-REV : You can flip the picture horizontally on the screen.
 shARpNess : As you increase this value, the picture outline
becomes stronger and clearer. Adjust this value appropriately
depending on the sharpness of the picture.
 COaX：COAX option is set to "On" will specify the use of
coaxial communication.
PRIVACY AREA SETUP
▶ 1.AREA
2.MODE
3.MASK COLOR
4.SEL POS
5.POS
*IIIIIIIIIIIIIIIIIIIIIIIIII
6.RETURN
SYNC
▶ PHASE
*IIIIIIIIIIIIIIIIIIIII
Press SET to Return
SHARPNESS
▶ LEVEL
IIIII*IIIIIIIIIIIIIIII
Press SET to Return
English_25
AREA1
OFF
GREEN
LEFT
42
0
7