Samsung SCD-1080P User Manual page 23

 Off : Deactivates SSNR. Noise is not reduced.
 ON : Activates SSNR so that noise is reduced.
3. Set the SSNR mode to 'ON' and press the Function Setup
switch.
4. Then you can adjust the noise reduction level.
You cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
`
M
When adjusting the noise reduction level of the SSNR mode, remember that the higher the level set, the
`
more the noise level will be reduced but that after image may also occur.
dAy/NIGhT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up and Down
buttons so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Left and Right buttons according to the picture display you want.
 AUTO : The mode is switched to 'Color' in a normal
environment,but switches to 'B/W' mode when ambient
illumination is low. To set up the switching time for AUTO mode,
press the Function Setup switch. You can turn on or off the burst
signal on B/W mode.
- DWELL TIME : You can select the duration time about
changing the day/night mode.
↑ 3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
- BURST MODE : You can turn on or off the burst signal on B/W mode.
 COlOR : The picture is always displayed in color.
 b/W : The picture is always displayed in black and white. You can turn on or off the burst signal on
B/W mode.
SSNR
▶ LEVEL IIII*IIIIIIIIIIIIIIIIIIIIII
RETURN
AUTO SETUP
▶ DWELL TIME
BURST MODE
Press SET to Return
English_23
4
5 SEC
ON