Samsung SCD-1080P User Manual page 19

1. Press the Function Setup switch.
 Main setup menu is displayed on the monitor screen.
Select the function
using the Function
Setup switch up/
down.
2. Select a desired function using the Function Setup switch.
 Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
An item with the
`
M
icon and press the Function Setup switch.
An item with the - - - icon is unavailable due to function settings.
`
leNs
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed,
'LENS' by using the Function Setup switch so that the
arrow indicates 'LENS'.
2. The Lens mode has sub menu site as listed below.
 BRIGHTNESS : Adjusts the video brightness.
 FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings mode. To
activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.
 You can adjust the shutter value of manual shutter mode.
MAIN SETUP
▶ 1. LENS
2.EXPOSURE
3.DEFOG
4.WHITE BAL
5.BACKLIGHT
6.SSNR
7.DAY/NIGHT
8.SPECIAL
9.EXIT
icon also has sub menus. To select a sub menu, select an item with the
DC Change the status
using the Function
OFF Setup switch left/right.
ATW
OFF
ON
AUTO
SAVE
select
▶ 1. BRIGHTNESS
2. FOCUS ADJ
3. RETURN
DC LENS
10
IIIIIIIIIIII*IIIIIIIIIIII
English_19