Samsung SCD-1080P User Manual page 22

setup
baCkligHt
The SCD-1080 is designed so that it delivers a distinctive subject and background at the same time, even when
the subject is in backlight, by adopting a function of the proprietary B2 DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function Setup switch so
that the arrow indicates BACKLIGHT.
2. Select a desired mode using the Function Setup switch depending on the camera purpose.
 USeR blC : Enables a user to directly select a desired
area from a picture and to view the area more clearly.
- LEVEL : Adjusts the brightness level of a monitoring
area.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be
 HlC (High light Compensation) :
This function masks any areas of peak white light, this
minimizes whiteout due to over exposure and thus preserve
much of the on-screen details that are within the camera view.
- LEVEL : Adjusts the brightness level of a monitoring area.
- LIMIT : Enable to change the operating condition.
- MASK COLOR :Change the color of the masking area.
(Black, Red, Blue, Gray, Magenta)
 Off : Not being used.
ssNR
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR' by using the Function Setup switch
so that the arrow indicates 'SSNR'.
2. Select a desired mode using the Function Setup switch.
22_ setup
enhanced.
BLC SETUP
▶ 1. LEVEL
2. TOP IIIII*IIIIIIIIIIIIIIII
3. BOTTOM IIIIIIIIIIII*IIIIIIIII
4. LEFT IIIIII*IIIIIIIIIIIIIII
5. RIGHT IIIIIIIIIIIIIIII*IIIII
6. RETURN
HLC SETUP
▶ 1. LEVEL
2. LIMIT NIGHT ONLY
3. MASK COLOR
4. RETURN
MIDDLE
81
181
211
461
MIDDLE
BLACK