Example: Setting V-Max (Programming Option 9) - Lionel HO Veranda Owner's Manual

Running your locomotive in the analog
environment

Example: Setting V-Max (programming option 9)

V -Max is set in the same manner as V-Start, except you will hear "Set throttle to V-Max" after
activating the option. Simply flip the direction switch on the controller to set V-Max.
When double-heading your QSI Quantum system-equipped locomotives, make sure
Note!
that both locomotives have similar speed/throttle characteristics by adjusting V-Start
and
V-Max. This will prevent them from fighting each other.
12