Deleting A Saved Registration Set (Delete Registration Set) - Roland FP-50 Owner's Manual

Saving Performance Settings (Registrations)
8.
Press the [ ] (FAST) button .
9.
Press the [–] [+] buttons to select the copy-destination
number .
If you see a registration name next to the number, the number is
already in use.
If you choose to copy to a used number, your new registration will
replace the existing registration.
If you don't want to erase an existing registration, save to a number
where the name column shows "(Empty). "
If you decide to cancel, press the [REC] button.
10.
Press the [METRONOME] button .
The registration set is copied.
NOTE
Do NOT turn off the power while "Working. " is displayed.
11.
Press the [SONG] and [RHYTHM] buttons simultaneously
to finish .
32
Deleting a Saved Registration Set
(Delete Registration Set)
Here's how to delete a saved registration set from internal memory
or USB flash drive.
1.
Press the [SONG] and [RHYTHM] buttons simultaneously .
2.
Press the [ ] [ ] (SLOW/FAST) buttons to select "Del Rgst . "
* The following steps are not available if there are no registration
sets saved in internal memory, or if no USB flash drive is
connected.
3.
Press the [METRONOME] button .
4.
Press the [–] [+] buttons to select the memory where the
set you want to delete is located .
Display Explanation
U (User) Internal memory
S (USB)
USB flash drive
5.
Press the [ ] (FAST) button .
6.
Press the [–] [+] buttons to select the registration set that
you want to delete .
7.
Press the [METRONOME] button .
A confirmation message appears.
If you decide to cancel, press the [ ] (SLOW) button.
8.
Press the [ ] (FAST) button .
The selected registration set is deleted.
NOTE
Do NOT turn off the power while "Working. " is displayed.
9.
Press the [SONG] and [RHYTHM] buttons simultaneously
to finish .