Loading A Previously Saved Registration Set (Load Button); Deleting A Previously Saved Set Of Registrations (Clear) - Roland AT90 Owner's Manual

Deleting a previously saved
set of registrations (Clear)
Loading a previously saved
registration set (Load button)
Here's how to recall a previously saved registra-
tion set from disk into the memory of the AT-90.
Be aware that when you load a set of registra-
tions from disk, the set of registrations that were
previously in internal memory will be lost.
. Insert the floppy disk into the disk drive.
. Press the Registration button (indicator lights).
. Use the Select buttons to select the registration
set that you wish to load.
. Press the Load button to execute loading.
When loading is complete, the basic screen will
reappear.
To cancel the procedure, press the Registration
button.
Here's how to delete a registration set that was
saved to disk.
. Insert the floppy disk into the disk drive.
. Press the Registration button (indicator lights).
. Use the Select buttons to select the registration
set that you wish to delete.
. Simultaneously press the Function button and
the Save button.
The
. If you are sure that you wish to delete the data,
press the Rec button.
When the data has been deleted, the basic
screen will reappear.
To cancel the operation, press the Reset button.
When a registration set has been deleted, the
indication of "USE" will change to "~ - —". If
you had assigned a name to the set you deleted,
the name will revert back to REGIST-XX.
47