Getting Ready; Using A Stand - Roland FP-50 Owner's Manual

Getting Ready

Using a Stand

Be careful not to pinch your fingers when setting up the stand.
Please use one of the following Roland stands to support your FP-50: KSC-44, KS-G8, KS-18Z, or KS-12.
Refer to the following when using a stand.
KSC-44
Refer to the KSC-44 Owner's Manual.
KS-G8
Align the back panel
of the FP-50 with
the rubber base of
the stand
KS-18Z
Align the front of the
FP-50 with the front
of the stand
KS-12
Adjust the
stand to a level
no higher than
the second
level from the
bottom
12
Adjust the stand
to the lowest
level
Adjust the
stand to a level
no higher than
the second
level from the
bottom
Place the FP-50 so that
its rubber feet are on the
inner side of the stand
Top view
Adjust the width of the stand so
that the rubber feet of the FP-50
straddle the stand
Top view
Adjust the width of the stand
so that the rubber feet of
the FP-50 fit into the holes
provided for the rubber feet
Top view