Saving A Registration Set (Registration Export); Loading A Saved Registration Set (Registration Import) - Roland DP603 Owner's Manual

Saving a Registration Set (Registration Export)

You can save all registrations held in registration memory into a
registration set on a USB flash drive.
1.
Connect your USB flash drive to the USB Memory port
(p. 7).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [K] [J] buttons to select "Registration Export," and
then press the [s] (Enter) button.
The Registration Export screen appears.
4.
Rename the registration set.
Select the position at which you want to change
[K] [J] buttons
the character.
[–] [+] buttons Change the character.
If you decide to cancel, press the [u] (Exit) button.
5.
Press the [s] (Enter) button.
The settings are saved.
NOTE
Never turn off the power while the screen indicates "Executing... "
6.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Loading a Saved Registration Set (Registration
Import)
Here's how a registration set that's saved on a USB flash drive can be
loaded into the [Registration] button.
NOTE
When you load a registration set, the registrations that were
saved in the [Registration] button are overwritten and lost. If you
don't want to lose these registrations, save them to a USB flash
drive.
1.
Connect your USB flash drive to the USB Memory port
(p. 7).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [K] [J] buttons to select "Registration Import," and
then press the [s] (Enter) button.
The Registration Import screen appears.
4.
Use the [–] [+] buttons to select the registration set that
you want to load.
5.
Press the [s] (Enter) button.
A confirmation message appears.
If you decide to cancel, press the [u] (Exit) button.
6.
Use the [J] button to select "Yes," and then press the [s]
(Enter) button.
The settings are loaded.
NOTE
Never turn off the power while the screen indicates "Executing... "
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Advanced Operation
17