Download Print this page

iHome iP41 User Manual page 7

Alarm clock for iphone / ipod

Advertisement

Charging your iPhone/iPod
Note: Please make sure you are using the correct inset for your iPhone/iPod (see Install iPhone/iPod Insert) and
that it is properly docked into the iP41. Failure to do so may damage your iPhone/iPod.
While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully
charged).
Listening to iPhone/iPod
1. Dock the already playing iPhone/iPod, the iP41 will automatically turn on and you will hear the music
playing from your iPhone/iPod. Note: If the volume is too low on the iPhone/iPod, iP41 may not detect
iPhone/iPod is in play mode. Press the
to play it.
2. When the iPhone/iPod is docked and in standby mode, press the
iPod icon
will appear on the display indicating iPod mode
3. Press the
Button to pause play; press again to resume it.
4. Press the
and
5. Press
or
Button on remote control to go to the next or previous track. Press and hold while track is
playing for high speed forward or reverse music search of the current track.
6. You can rotate the unit for viewing video, the iP41 display also will change to fit your view orientation too.
7. To turn off the unit, press the
charging while in the dock.
Listening to non-docking iPod or other portable audio devices
If you are using an iPod without a docking port or other MP3 player or other portable audio device, you can play
it through the iP41 via the Aux-in Jack.
1. Plug one end of an audio patch cord (available at www.ihome.com ) into the headphone or line-out jack
on your device and the other end of the patch cord into the Aux-in Jack, located on the back of the unit.
2. Press the
Button to turn the iP41 on.
3. Press the
or
need to adjust your device volume too.
4. To turn off the unit, press the
Watching Videos (iPhone and iPod models with Horizontal Video Mode)
Make sure you have installed the correct cradle for your iPhone, iPod touch or nano 4G model.
1. Gently turn the unit with docked iPhone or iPod on its left side. The clock display will adjust to the new
orientation.
2. Select a video file on your iPhone/iPod and press play.
3. Press Play on the iP41 if needed to turn unit on.
Button to adjust the system volume.
Button on the main unit or remote control. Your iPhone/iPod will continue
Button on the main unit or on the remote control to adjust the system volume. You may
Button. Please remember to turn off your device, too.
Using the iP41
Power Button on the main unit once or
5
Play/Pause Button
Button on main unit to play it. The

Hide quick links:

Advertisement

loading