Ddns Configuration; Typical Ddns Configuration Procedure - Thecus N3200 User Manual

NOTE
NOTE

DDNS Configuration

From the Network menu, choose the DDNS
item, and the DDNS Support screen
appears. You can change any of these items
and press Apply to confirm your settings. A
description of each item follows:
DDNS Support
Item
DDNS
Register
User Name
Password
Domain Name
Apply

Typical DDNS Configuration Procedure

To setup DDNS on your N3200, follow the steps below:
1. Go to http://www.dyndns.org from your home PC.
2. Click on the Sign Up Now link.
3. Check the check boxes, select a user name (i.e.: N3200), enter your email
address (i.e.: xxx@example.com), check Enable Wildcard, and create a
password (i.e.: xxxx).
4. Wait for an email from www.dyndns.org.
5. Open the email and click on the link to activate your account.
6. Once your account is activated, enter the DDNS server, user name,
password, and host name into the DDNS Support screen.
7. Click Apply to save your changes.
The IP Segment of WLAN, WAN and LAN should not overlap.
Users should obey the international RF regulatory rules as they set up the wireless
RF channel on the N3200. The RF operating channels for different regions have
been specified as following. Thecus has no responsibility for users attempting to
violate the international RF regulation.
11 N. America
14 Japan
13 Europe (ETSI)
2 Spain
4 France
Description
Enable or disable DDNS support.
Enter your desired DDNS server here.
Enter your user name.
Enter your password or DDNS key.
Enter your host name (i.e. www.N3200.dyndns.org)
Click to save your changes.
36