Russell Hobbs RH1250TB Instruction Manual page 25

Washing procedure & program selection
Adding/Removing Laundry
If you want to add or remove laundry when your machine is running:
• Press the Start/pause button to put the machine in to pause mode.
• After a while, the symbol
that the door of your machine can now be opened.
• When you see the symbol
remove laundry after opening the machine door.
Important Note
If symbol blinks on the electronic display, it means that you cannot add or remove
laundry as the cycle has started.
• When you have added or removed the laundry, close the door of your machine and
press on Start/Pause button.
• Your machine will continue to wash after locking the door of your machine.
• The symbol
Child Lock
A child lock prevents the interruption of a cycle when buttons are pressed and the dial is
turned. The Child lock will be activated when both the rapid wash and easy iron buttons
are pressed at the same time for 3 seconds or longer.
will be shown on the electronic diplay and this means
appears on the electronic display, you can either add or
will flash on the electronic display.
24