Russell Hobbs RH1250TB Instruction Manual page 11

Water drainage
• Never forget to install drain hose before operating your washer.
• The water drain hose should be mounted at a height of minimum 60 cm, maximum 100
cm from the ground.
• The end of the water drain hose can be fitted directly to the drainage hole on the back
side of the washer.
• When installing the drain hose pipe, secure it tightly with a string or tie extensions are
available but is not included.
• Never attempt to extend the water drain hose by adding extra parts.
• If the drain hose is too long, do not force it back into the washer. This will cause
abnormal noise and damage to the product.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
Installation
us at www.productcareuk.com
10