Technical Specification AW 220
The following technical data were measured on randomized test objects and are
typical data.
All measurements are made with main voltage 120/240 V 50Hz / 60Hz.
Main voltage 120 / 240 V. Clipping point of the amplifier is set to a level
where total harmonic distortion (THD) is 0.2%.
Output impedance (20-20kHz) ............................ <0.01ohm
Input impedance stereo ...................................... 330kohm
Input impedance mono ....................................... 165kohm
Input sensitivity for rated output ........................... 1.6V (adjustable)
Max. peak current ................................................ >60A
THD (1kHz half power, 8ohm) ............................. <0.006%
THD (1kHz –1dB, 8ohm) .................................... <0.007%
Noise (both inputs shortened) ............................ <130uV
Frequency response ........................................... DC-65kHz -3dB
Channel separation (1kHz-10kHz) ...................... >90dB
Rated output power
10% change in line voltage will give app. 20% change in output power.
Stereo:
8 ohm 2 x 70 W
4 ohm 2 x 120W
2 ohm 2 x 160W
Mono:
8 ohm 1 x 220W
Dimensions
Width
483mm
Depth
380mm
Height
110mm
Weight 15kg
The manufacturer reserves the right to alter these specifications without further notice
(19")
(15")
(4.3")
(33lbs)
8