Switch The Device On And Off - Nokia N86 8MP User Manual

not be fully compatible with this device.
Incompatible cards may damage the card and the
device and corrupt data stored on the card.
Insert the memory card
A memory card may be already inserted in the
device. If not, do the following:
1. With the back of the device facing you, lift up the
cover.
2. Insert a compatible memory card in the slot.
Ensure that the contact area on the card is facing
down and towards the slot.
3. Push the card in.
You can hear a
click when the
card locks into
place.
4. Close the back
cover. Ensure that
the cover is
properly closed.
Remove the memory card
Important: Do not remove the memory card
during an operation when the card is being
accessed. Doing so may damage the memory card
and the device, and corrupt data stored on the card.
1. Before you remove the card, press the power
key, and select
applications are closed.
2. When
open applications. Remove anyway?
displayed, select Yes.
3. When
displayed, remove the back cover of the device.
4. Press the memory card to release it from the slot.
5. Pull out the memory card. If the device is
switched on, select OK.
6. Replace the back cover. Ensure that the cover is
properly closed.

Switch the device on and off

To switch on the device:
1. Press and hold the power key.
© 2010 Nokia. All rights reserved.
Remove memory
Removing memory card will close all
Remove memory card and press 'OK'
card. All
is
is
13