Table of Contents
Advertisement
3.
Insert the battery.
4.
To replace the cover,
direct the top locking
catch toward its slot
first and then press
down until the cover
locks into place.
Switch the device on
1.
Press and hold the power key.
2.
If the device asks for a PIN code
or lock code, enter it, and press
the left selection key. The
factory setting for the lock
code is 12345.
Your device has internal
antennas.
Note: Your device may have
internal and external antennas. As with any radio
transmitting device, avoid touching the antenna
unnecessarily when the antenna is in use. Contact
with such an antenna affects the communication
quality, may cause the device to operate at a higher
power level than otherwise needed and may reduce
the battery life.
1
— Bluetooth antenna and GPS receiver
3
— Cellular antenna
Charge the battery
1.
Connect a compatible
charger to a wall
outlet.
2.
Connect the power
cord to the device. If
the battery is
completely
discharged, it may
take a while before the charging indicator starts
scrolling.
3.
When the battery is fully charged, the charging
indicator stops scrolling. Disconnect the charger
from the device, then from the wall outlet.
15
Advertisement
Table of Contents
