Bluetooth - Nokia N86 8MP User Manual

Wired equivalent privacy (WEP) with keys up to
●
128 bits, Wi-Fi protected access (WPA), and
802.1x authentication methods. These functions
can be used only if they are supported by the
network.
Important: Always enable one of the
available encryption methods to increase the
security of your wireless LAN connection. Using
encryption reduces the risk of unauthorised access
to your data.
WLAN connections
To use a WLAN, you must create an internet access
point in a WLAN. Use the access point for
applications that need to connect to the internet. A
WLAN connection is established when you create a
data connection using a WLAN access point. The
active WLAN connection is ended when you end the
data connection. You can also end the connection
manually.
You can use a WLAN during a voice call or when
packet data connection is active. You can only be
connected to one WLAN access point device at a
time, but several applications can use the same
internet access point.
When the device is in the Offline profile, you can still
use a WLAN, if available. Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
If you move the device to another location within
the WLAN and out of range of a WLAN access point,
the roaming functionality can automatically
connect your device to another access point that
belongs to the same WLAN. As long as you remain
within range of access points that belong to the
same network, your device can stay connected to
the network.
Tip: To check the unique media access control
(MAC) address that identifies your device, for
example to configure the MAC address of your
device to a WLAN router, enter *#62209526#
in the home screen. The MAC address is
displayed.

Bluetooth

Select Menu
Bluetooth.
About Bluetooth
Bluetooth technology in your device enables
wireless connections between electronic devices
© 2010 Nokia. All rights reserved.
Tools Connectivity
> > >
33