Table of Contents
Advertisement
RM-409_FCC_draft_en_1.fm Page 11 Friday, May 2, 2008 10:25 AM
■ Switch the device on and off
Press and hold the power key.
If the device asks for a PIN code, enter the PIN code, and select
OK.
If the device asks for the lock code, enter the lock code, and select
OK. The factory setting for the lock code is 12345.
For more information about access codes, see "Access codes,"
p. 16.
To set the correct time zone, time, and date, select the country
you are presently in, then enter the local time and date. See also
"Clock," p. 47.
Welcome application
The Welcome application starts when you switch on your device for the first time.
With the Welcome application, you can access the following applications:
Sett. wizard — Configure connection settings. See "Settings wizard," p. 12.
Switch — Copy or synchronise data from other compatible devices.
To open Welcome later, select
> Help > Welcome.
Antenna locations
Cellular antenna (1)
Bluetooth antenna (2)
Your device may have internal and external antennas. As
with any radio transmitting device, avoid touching the
antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an antenna
affects the communication quality and may cause the device
to operate at a higher power level than otherwise needed and
may reduce the battery life.
■ Configuration settings
Before you can use multimedia messaging, e-mail,
synchronisation, streaming, and the browser, you must have the proper
configuration settings on your device. Your device may automatically configure
browser, multimedia messaging, access point, and streaming settings based on
the SIM card used. If not, you can use the setting wizard application to configure
G e t s t a r t e d
11
Advertisement
Table of Contents
