Headset; Attach Wrist Strap - Nokia N86 8MP User Manual

USB charging
You can use USB charging when a wall outlet is not
available. With USB charging, you can also transfer
data while charging the device.
1. Connect a compatible USB device to your device
using a compatible USB cable.
The efficiency of USB charging varies
significantly. In some cases, it may take a very
long time for charging to start and the device to
start functioning.
2. If your device is switched on, you can select from
the available USB mode options on the display
of the device.
During extended operation such as an active video
call and high speed data connection, the device may
feel warm. In most cases, this condition is normal.
If you suspect the device is not working properly,
take it to the nearest authorised service facility.

Headset

You can connect a compatible headset or
compatible headphones to your device. You may
need to select the cable mode.
Some headsets come in two parts, a remote control
unit and headphones. A remote control unit has a
microphone and keys to answer or end a phone call,
adjust the volume, and play music or video files. To
use the headphones with a remote control unit,
connect the unit to the Nokia AV Connector in the
device, then connect the headphones to the unit.
Warning: When you use
the headset, your ability to hear
outside sounds may be affected.
Do not use the headset where it
can endanger your safety.
Do not connect products that
create an output signal as this
may cause damage to the device.
Do not connect any voltage source
to the Nokia AV Connector.
When connecting any external
device or any headset, other than
those approved by Nokia for use with this device, to
the Nokia AV Connector, pay special attention to
volume levels.

Attach wrist strap

1. Open the back cover.
© 2010 Nokia. All rights reserved.
15