Memory Operation; Memory Channels; Memory Channel Selection - Icom IC-718 Instruction Manual

n Memory channels
The transceiver has 101 memory channels. The
memory mode is very useful for quickly changing to
often-used frequencies.
MEMORY
MEMORY
CHANNEL
CHANNEL
NUMBER
Regular memory
channels
Scan edge
memory
channels
n Memory channel selection
D Using the [UP Y] or [Z DN] keys
q Push [V/M] to select memory mode.
• "MEMO" appears.
w Push [CH] to enter memory CH select mode.
• "MEMO" blinks.
e Push [UP Y] or [Z DN] several times to select the
desired memory channel.
• Push and hold [UP Y] or [Z DN] for continuous
selection.
r Push [CH] to exit memory CH select mode.
t To return to VFO mode, push [V/M] again.
CAPABILITY
One frequency and one mode in
1–99
each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
1
V/M
CH
Z Y
DN or UP
CH

MEMORY OPERATION

All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the tuning dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
D Using the keypad
q Push [V/M] to select memory mode.
• "MEMO" appears.
w Push [CH] to enter memory CH select mode.
• "MEMO" blinks.
e Push [F-INP/ENT], then push the desired memory
channel number using the keypad.
r Push [F-INP/ENT] to select the desired memory
channel.
t Push [CH] to exit memory CH select mode.
6
OVER-
CLEAR
WRITING
Yes Yes
Yes No
1
V/M
CH
F-INP
ENT
1 2
A=B
V/M
F-INP
ENT
CH
35