Icom IC-718 Instruction Manual page 48

8
SET MODE
• Tuner type
This item selects optional antenna tuner type.Three
selections are available.
• no : No optional tuner connected.
• 4 : The optional AH-4 antenna tuner is connected.
• 18 : The optional AT-180 antenna tuner is connected
The default is no.
• Auto tune
The optional AT-180
start capability which starts tuning if the SWR is higher
than 1.5—3.
When "off" is selected, the tuner remains OFF even
when the SWR is poor (1.5—3). When "on" is selected,
automatic tune starts even when the tuner is turned OFF.
The default is oF (OFF).
• PTT tune
When an optional AH-4 or AT-180
is connected, tuning can be started automatically at
TUNER
the moment the PTT is pushed.
The default is oF (OFF).
• Speech language
When an optional UT-102
installed, you can select between English and Japanese
as the language.
The default is En (English).
• Speech speed
When an optional UT-102
installed, you can select faster or slower synthesizer output.
The default is HI (High).
• Speech S-meter level
When an optional UT-102 is installed, the synthesizer can
be set to read the frequency/mode only (OFF), or both the
frequency/mode and S-meter level (ON).
The default is on.
• CI-V baud rate
This item sets the data transfer rate. When "Auto" is
selected, the baud rate is automatically set according to
the connected controller or remote controller.
The default is At (Auto).
46
has an automatic
ANTENNA TUNER
AUTOMATIC ANTENNA
VOICE SYNTHESIZER UNIT
VOICE SYNTHESIZER UNIT
is
is