Table of Contents
Advertisement
Chapter 3: Installation and Configuration
Installing Cable Retention Clips on Outlets (Optional)
32
If your Dominion PX device is designed to use a cable retention clip, install
the clip before connecting a power cord. A cable retention clip prevents the
connected power cord from coming loose or falling off.
The use of cable retention clips is highly recommended for regions with
high seismic activities, and environments where shocks and vibrations are
expected.
These optional clips come in various sizes to accommodate diverse power
cords used on IT equipment, which are connected to C13 or C19 outlets.
You can request a cable retention kit containing different sizes of clips
from you reseller. Make sure you use a clip that fits the power cord snugly
to facilitate the installation or removal operation (for servicing).
Note: Some NEMA sockets on PSE-certified PDUs for Japan have integral
locking capability and do not need cable retention clips.
To install and use a cable retention clip on the outlet:
1. Locate two tiny holes adjacent to the outlet.
2. Install the cable retention clip by inserting two ends of the clip into the
tiny holes.
Advertisement
Table of Contents
