Table of Contents
Advertisement
Chapter
7
Advanced Recording
■ Using the Camcorder only
If your camcorder has both mic input and audio output, you can
perform video synchronized recording using the camcorder only.
1. Set the Disklavier following the procedures 1 to 5 on page 61.
2. Connect a camcorder to the control unit.
Control unit
3. Select a destination medium and album.
4. Press [RECORD].
5. Start recording on the camcorder.
6. Press [PLAY].
7. Wait for approximately ten seconds, and then start playing your
song.
8. Press [STOP] when you finish playing your song.
9. Stop recording on the camcorder.
64
Camcorder
To mic/line
input
RCA cord with
resistance
(not supplied)
To audio
output
RCA cord
(not supplied)
Advertisement
Table of Contents
