Table of Contents
Advertisement
4
To set the time for the display to dim, press [
the cursor to the dim light parameter, then press
[+/YES] and [–/NO].
The following time settings are available: OFF, 1min, 2min, 3min,
5min, 10min, 15min, 30min, 45min, 60min.
If there is no operation for the time set above, the display dims to
half the brightness of its original setting.
5
Press [ENTER] to complete the operation.
Switching the Languages for the Screen
[SYSTEM]
"Language"
1
Press [SYSTEM] on the remote control.
The system menu screen appears.
=SYSTEM MENU=
Clock Adj.
Backup
2
Select "Language" with the cursor buttons ([
[
]), then press [ENTER].
The language setting screen appears.
=Display=
*Brightness=100%
*Dim
light=1min.
(1/2)
TimeZone
Restore
=SYSTEM MENU=
(2/2)
*Language
*Maintenance
*Display
= anguage=
-+ENT
anguage=English
Note:
] to move
The brightness of the display will
return to its original setting when
you press any buttons, insert media,
or eject media.
?=-+ENT
] [
] [
]
Chapter
11
Other Settings
121
Advertisement
Table of Contents
