Table of Contents
Advertisement
Chapter
11
Other Settings
3
Press [+/YES] and [–/NO] to select the language.
4
Press [ENTER].
"OK?" flashes in the first line of the screen.
5
Press [+/YES] to set the language, and return to the
system menu screen.
Resetting the Disklavier
[SETUP]
"Reset"
If you want to return your Disklavier to its initial factory settings, follow the
procedure below.
1
Press [SETUP] on the remote control.
The setup menu screen appears.
2
Select "Reset" with the cursor buttons ([
[
]), then press [ENTER].
The reset screen appears.
122
= anguage=
OK? YES/NO
anguage=Japanese
=SETUP MENU=
(1/3)
*TimerPlay
*AudioI/O
*MIDI
*M-Tune
=SETUP MENU=
(3/3)
*Passcode
*Reset
=Reset=
-+ENT
>Reset=Parameter
Important:
If you reset your Disklavier,
depending upon the option you
select, you may lose all parameters
or all data in the internal memory, or
both of these. For normal use, you
do not have to reset. If you must
reset your Disklavier, Yamaha
strongly recommends that you
backup your songs in the internal
memory. However, you cannot
backup your various parameter
settings.
] [
] [
]
To make a backup copy of the songs
which are in the internal memory,
see Chapter 8 "Media Management
– Making Backups of Songs" on
page 94.
Advertisement
Table of Contents
