Recording The Left And Right Parts Together (Setting A Split Point) - Yamaha Disklavier E3 Classic Operation Manual

Table of Contents

Advertisement

Chapter
7
Advanced Recording
12
Press [STOP] when you finish playing your song.
The following screen appears.
The following table gives a description of each of the options.
Option
SAVE
NEW
CANCEL The second part is discarded. The first part is kept under
13
Press [
[ENTER].
The right-hand part is saved as indicated or canceled.

Recording the Left and Right Parts Together (Setting a Split Point)

[RECORD]
[FUNC.]
You can also record an L/R song by playing the left- and right-hand parts
simultaneously. In this case, a keyboard split point is set, and the notes
played on the left-hand side of the split point are saved as the left-hand
part, and notes played on the right-hand side of the split point are saved as
the right-hand part.
1
Select a destination medium and album.
2
Press [RECORD].
3
Press [FUNC.] in the recording standby screen.
The part selection screen appears.
56
=Memory=
Save to Disk?
*SAVE
*NEW
*CANCEL
Description
The second part is saved with the first part under the
current song number, overwriting the previously saved
first part.
The second part is saved under a new song number. The
first part is kept under the previous song number.
the previous song number.
] and [
] to select an option, then press
=Memory=
L=REC R=OFF

ENT
LR
To select a medium or album, see
Chapter 3 "Basic Song Playback –
Selecting Medium and Their
Contents" on page 21.
In the case you want to title your
new song before recording, see
Chapter 6 "Basic Recording –
Titling a Song at the Start of
Recording" on page 50, to rename
the title after recording, see Chapter
8 "Media Management – Renaming
a Song" on page 75.
If you want to record your L/R song
using the metronome, see Chapter 7
"Advanced Recording – Recording
with the Internal Metronome" on
page 52.

Advertisement

Table of Contents
loading

Table of Contents