Table of Contents
Advertisement
Chapter
2
Getting Started
Turning Off the Disklavier (Standby Mode)
Press [ON/STANDBY] on the remote control.
The ending screen appears, and [ON/OFF] on the control unit lights
red.
Shutting Down the Disklavier
Press [ON/OFF] on the control unit.
The ending screen appears, and [ON/OFF] on the control unit turns
off.
Compatible Media Format for the Removable Media
Compact Disc
The Disklavier can play songs on commercial audio CDs and data CDs
(such as PianoSoft·PlusAudio).
• The audio CDs should be formatted in CD-DA.
• The data CDs should be formatted in ISO 9660 Level 1.
USB Flash Memory
You can use commercially available USB flash memories to store song
data. The USB flash memory should be formatted in FAT16 or FAT32 file
system.
USB Hard Disk
You can use commercially available USB hard disk drives to store song
data or make a backup of song data. The USB hard disk drive should be
formatted in FAT32 file system.
Floppy Disk (Optional)
With the optional USB floppy disk drive, you can use 3.5" 2DD or 2HD
floppy disks to store song data. The floppy disk should be formatted in MS-
DOS.
18
See you again
See you again
Note:
Press [ON/STANDBY] on the
remote control to turn the Disklavier
back on.
Note:
Be sure to wait 5 seconds before
turning the Disklavier back on.
Note:
If the external medium contains a
number of albums or songs, it may
take some time for the Disklavier to
recognize them.
Note:
Do not insert or remove the USB
media while reading or writing data.
Make sure that reading or writing
has finished before doing so.
Advertisement
Table of Contents
