Table of Contents
Advertisement
Chapter
10
Enhancing the Disklavier by Hooking Up Other Devices
3
Select a desired option with the cursor buttons ([
then press [+/YES] and [–/NO] to change setting.
4
Press [ENTER] to complete the operation.
Hooking Up MIDI Devices
MIDI (an acronym for Musical Instrument Digital Interface) allows
electronic device (synthesizers, etc.) to interact and work in
synchronization with other MIDI compatible device. The Disklavier enables
you to enjoy a variety of MIDI features by connecting a MIDI device or
computer to the Disklavier's control unit.
MIDI device (sequencer, synthesizer, etc.) or computer
Control unit
108
To USB
To MIDI
port
input
USB cable
MIDI cable
(not supplied)
(not supplied)
] [
]),
Note:
When you use the USB connection,
it is required to install the USB
driver to the connected device. In
such a case, visit the following
website and download the driver.
http://download.yamaha.com/
Note:
Be sure to use the commercially
available MIDI cable with the L-
shaped connector on the control unit
end.
To MIDI
output
Advertisement
Table of Contents
