Using And Replacing The Oven Light(S) - Whirlpool KESC307 Use And Care Manual

Thermal-convection electric ranges
Table of Contents

Advertisement

U
sing and Caring for Your Oven

Using and replacing the oven light(s)

Your oven may have a standard oven light
or two side halogen lights. The oven light(s)
will come on when you open the oven door.
To turn the light(s) on when the oven door
is closed, press the Oven Light pad
on the control panel. Press the pad
again to turn off the light(s).
Replacing the oven light
(models with light on back wall):
1.
Unplug range or disconnect power.
2.
Make sure the oven is cool before
replacing the light bulb.
3.
Remove the glass bulb cover in the back
of the oven by turning it counterclockwise.
4.
Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
5.
Replace the light bulb cover by turning it
clockwise. The light bulb cover must be in
place when using the oven. The cover
protects the bulb from breaking and from
high oven temperatures.
6.
Plug in range or reconnect power.
NOTE:
The oven light will not work during
the Self-Cleaning cycle.
56
Replacing oven lights
(models with side halogen lights):
1.
Unplug range or disconnect power.
2.
Make sure the oven is cool before replac-
OVEN
LIGHT
ing the light bulb.
OVEN
LIGHT
3.
Remove glass light cover by grasping
front edge of cover and pulling it away
from the side wall of the oven.
4.
Remove the light bulb from its socket.
Replace the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
5.
Replace the light cover by snapping it
back into wall.
6.
Plug in range or reconnect power.
NOTE:
The oven lights will not work during
the Self-Cleaning cycle.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ykesh307Kesh307Ykerc607Kerc607Ykesc307

Table of Contents