Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
30" (76.2 CM) SLIDE-IN GAS RANGES
INSTRUCTIONS POUR L'INSTALLATION DES
CUISINIÈRES À GAZ ENCASTRABLES DE 30"
Table of Contents
RANGE SAFETY .............................................................................2
INSTALLATION REQUIREMENTS .................................................4
Tools and Parts .............................................................................4
Location Requirements ................................................................4
Electrical Requirements ...............................................................7
Gas Supply Requirements ...........................................................7
INSTALLATION INSTRUCTIONS ...................................................9
Unpack Range..............................................................................9
Install Anti-Tip Bracket .................................................................9
Adjust Leveling Legs ..................................................................10
Level Range ................................................................................11
Make Gas Connection ...............................................................11
Verify Anti-Tip Bracket Is Installed and Engaged ......................13
Electronic Ignition System .........................................................13
Remove/Replace Drawer ...........................................................14
Oven Door ..................................................................................14
Complete Installation .................................................................15
GAS CONVERSIONS ....................................................................16
Propane Gas Conversion ...........................................................16
Natural Gas Conversion .............................................................19
Adjust Flame Height ...................................................................22
IMPORTANT:
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
IMPORTANT :
Installateur : Remettre les instructions d'installation au propriétaire.
Propriétaire : Conserver les instructions d'installation pour référence ultérieure.
W11398805A
(76,2 CM)
SÉCURITÉ DE LA CUISINIÈRE ...................................................24
EXIGENCES D'INSTALLATION ...................................................26
Outils et pièces ...........................................................................26
Exigences d'emplacement .........................................................26
Spécifications électriques ..........................................................29
Spécifications de l'alimentation en gaz .....................................29
INSTRUCTIONS D'INSTALLATION .............................................31
Déballage de la cuisinière ..........................................................31
Installation de la bride antibasculement ....................................31
Réglage des pieds de nivellement .............................................32
Réglage de l'aplomb de la cuisinière .........................................33
Raccordement au gaz ................................................................33
Vérifier que la bride antibasculement
est bien installée et engagée .....................................................35
Système d'allumage électronique..............................................36
Dépose et réinstallation du tiroir ................................................37
Porte du four ..............................................................................37
Achever l'installation ..................................................................38
CONVERSIONS POUR CHANGEMENT DE GAZ ......................39
Conversion pour l'alimentation au propane ..............................39
Conversion pour l'alimentation au gaz naturel ..........................43
Réglage de la taille des flammes ...............................................46
Table des matières
Advertisement
Table of Contents
Related Manuals for Whirlpool KSGG700ESS2
Summary of Contents for Whirlpool KSGG700ESS2
-
Page 1: Table Of Contents
INSTALLATION INSTRUCTIONS 30" (76.2 CM) SLIDE-IN GAS RANGES INSTRUCTIONS POUR L’INSTALLATION DES CUISINIÈRES À GAZ ENCASTRABLES DE 30" (76,2 CM) Table of Contents Table des matières RANGE SAFETY ................2 SÉCURITÉ DE LA CUISINIÈRE ...........24 INSTALLATION REQUIREMENTS ..........4 EXIGENCES D’INSTALLATION ...........26 Tools and Parts ................4 Outils et pièces ................26 Location Requirements ..............4... -
Page 2: Range Safety
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... - Page 3 In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. Acceptable Shut-off Devices: Gas Cocks and Ball Valves installed for use shall be listed. A flexible gas connector, when used,must not exceed 4 feet (121.9 cm).
-
Page 4: Installation Requirements
INSTALLATION REQUIREMENTS ■ Optional Parts Tools and Parts To purchase these or any other accessories, please reference the “Accessories” section of the User Guide for contact information. Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools ■... - Page 5 Mobile Home - Additional Installation Requirements Product Dimensions The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, This manual covers several models. Your model may appear Part 3280 (formerly the Federal Standard for Mobile Home different from the models depicted.
- Page 6 Cabinet Dimensions Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. IMPORTANT: If installing a range hood or microwave hood combination above the cooking surface, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
-
Page 7: Electrical Requirements
Electrical Requirements Gas Supply Requirements WARNING WARNING Electrical Shock Hazard Explosion Hazard Plug into a grounded 3 prong outlet. Use a new CSA International approved gas supply line. Do not remove ground prong. Install a shut-off valve. Securely tighten all gas connections. Do not use an adapter. - Page 8 Flexible Metal Appliance Connector: Gas Pressure Regulator ■ If local codes permit, a new CSA design-certified, 4 to 5 ft (122 to 152.4 cm) long, 1/2" or 3/4" (1.3 or 1.9 cm) The gas pressure regulator supplied with this range must be I.D.
-
Page 9: Installation Instructions
INSTALLATION INSTRUCTIONS Unpack Range Install Anti-Tip Bracket WARNING WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from the range. Keep cardboard bottom under range. -
Page 10: Adjust Leveling Legs
4. Drill two 1/8" (3 mm) holes that correspond to the bracket Adjust Leveling Legs holes of the determined mounting method. See the following illustrations. 1. If range height adjustment is necessary, use a wrench Floor Mounting or pliers to loosen the 4 leveling legs. This may be done with the range on its back or with the range supported on 2 legs after the range has been placed back to a standing position. -
Page 11: Level Range
3. Use a 15/16" (2.4 cm) combination wrench and an adjustable Level Range wrench to attach the flexible connector to the adapters. IMPORTANT: All connections must be wrench-tightened. Do 1. Place level on the oven bottom, as indicated in one of not make connections to the gas regulator too tight. - Page 12 4. Remove cooktop burner caps and bases from package 6. Place the burner caps on the appropriate burner bases. containing parts. Place the burner bases as indicated by the IMPORTANT: The bottom of the small and medium caps are following illustration for your model: different.
-
Page 13: Verify Anti-Tip Bracket Is Installed And Engaged
Verify Anti-Tip Bracket Is Installed Electronic Ignition System and Engaged Initial Lighting and Gas Flame Adjustments Cooktop and oven burners use electronic igniters in place of On Ranges Equipped with a Premium Storage Drawer: standing pilots. When the cooktop control knob is turned to the 1. -
Page 14: Remove/Replace Drawer
Repeat steps 1 to 3. If the burner does not light at this point, To Replace: press the off pad and contact your dealer or authorized service 1. Align the forward drawer notches with the notches in the company for assistance. Please reference the “Warranty” section drawer glides on both sides. -
Page 15: Complete Installation
To Replace: Complete Installation 1. Insert both hanger arms into the door. Be sure that the hinge notches are engaged in the oven door frame. 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. -
Page 16: Gas Conversions
GAS CONVERSIONS Gas conversions from Natural gas to propane gas or from Propane Gas Conversion propane gas to Natural gas must be done by a qualified installer. WARNING WARNING Explosion Hazard Use a new CSA International approved gas supply line. Tip Over Hazard Install a shut-off valve. - Page 17 3. Remove plastic cover from gas pressure regulator cap. 3. Apply masking tape to the end of a 9/32" (7 mm) nut driver to help hold the gas orifice spud in the nut driver while 4. Turn gas pressure regulator cap counterclockwise with changing it.
- Page 18 6. Apply masking tape to the end of a 3/8" (1 cm) nut driver To Convert Oven Bake Burner (Natural Gas to to help hold the gas orifice spud in the nut driver while Propane Gas) changing it. Press nut driver down onto the gas orifice spud and remove by turning the Natural gas bake burner orifice 1.
-
Page 19: Natural Gas Conversion
4. Apply masking tape to the end of a 3/8" (1 cm) nut driver Natural Gas Conversion to help hold the gas orifice spud in the nut driver while changing it. Press nut driver down onto the gas orifice spud and remove by turning the Natural gas broil burner orifice WARNING hood counterclockwise to remove. - Page 20 4. Turn gas pressure regulator cap counterclockwise with 3. Apply masking tape to the end of a 9/32" (7 mm) nut driver to a 5/8" (1.6 cm) combination wrench to remove. help hold the gas orifice spud in the nut driver while changing it.
- Page 21 7. Replace the “56” spud with a “47” spud. Install the Natural To Convert Oven Bake Burner (Propane Gas to gas bake burner orifice spud, turning it clockwise until snug. Natural Gas) IMPORTANT: Do not overtighten. 1. Remove the oven racks and the oven door. See the “Oven Door”...
-
Page 22: Adjust Flame Height
5. Replace the “100” hood with a “155” hood. Install the Natural To Adjust Standard Burner: gas broiler burner orifice hood, turning it clockwise until snug. The flame can be adjusted using the adjustment screw in the IMPORTANT: Do not overtighten. center of the valve stem. - Page 23 4. If the oven bake flame needs to be adjusted, locate the air Adjust Oven Bake Burner Flame (If Needed) shutter near the center rear of the drawer cavity behind the access panel. Loosen the locking screw and rotate the air 1.
- Page 24 ©2019 All rights reserved. Used under license in Canada. W11398805A Tous droits réservés. Utilisé sous licence au Canada. 11/19...