Connect The Power Cord; Install The Ink Cartridges; Choose Your Language - Brother DCP-365CN Quick Setup Manual

4

Connect the power cord

IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
WARNING
The machine must be fitted with an earthed
plug.
Note
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
5

Choose your language

a
Press a or b to choose your language and
press OK.
b
Press a (Yes) to confirm the language setting.
6

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
a
Make sure that the power is turned on.
b
Open the ink cartridge cover.
c
Remove the green protective part.
d
Unpack the ink cartridge.
e
f
Take care to match the colour of the lever with
the cartridge colour.
g
Install each ink cartridge in the direction of the
arrow on the label.
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
3