Ring Signal Volume; Mute Ring Signal - Ericsson Dialog 4425 IP Vision User Manual

Ip telephone for md110 communication system and mobile enterprise communication solution

Hide thumbs Also See for Dialog 4425 IP Vision:

Table of Contents

Dialog 4425 IP Vision

Ring signal volume

Use the Volume keys to adjust the ring signal volume when the

phone is idle or ringing. Adjusted volume is stored.

Press to change the volume.

Note: The volume will return to the default level in case of a

power failure.

You can supress the ring signal for an incoming call.

Press to supress the ring signal.

The ring signal is switched off for the current call.

Silent ringing

If you do not want to be disturbed by the ring signal but still want to

be able to answer an incoming call, you can switch off the ring

signal. Incoming calls are only indicated by a flashing line lamp and

display information.

Press to switch off the ring signal.

The Mute key lamp is switched on to indicate silent ringing. The

ring signal will automatically be switched on the next time you Lift

the handset or press any key.

Settings

Table of Contents

Do you have a question about the Dialog 4425 IP Vision and is the answer not in the manual?