Chicago Electric 95960 Set Up, Operating, And Servicing Instructions page 26

EMiSSiON cONTROL SYSTEM WARRANTY (cONT.)
Harbor Freight Tools Emission control defects Warranty coverage
Engines are warranted for a period of two (2) years relative to emission control parts defects, subject to the provisions set forth
below. If any emission related part on your engine is defective, the part will be repaired or replaced by HFT.
1. Owner's Warranty Responsibilities
• As the engine owner, you are responsible for the performance of the required maintenance listed in your Owner's Manual. HFT
recommends that you retain all receipts covering maintenance on your engine, but HFT cannot deny warranty solely for the lack
of receipts or for your failure to ensure the performance of all scheduled maintenance.
• As the engine owner, you should, however, be aware that HFT may deny you warranty coverage if your engine or a part has failed
due to abuse, neglect, improper maintenance, or unapproved modifications.
• You are responsible for shipping your engine to a HFT warranty station as soon as a problem exists. Contact the HFT Customer
Service department at the number below to make shipping arrangements. The warranty repairs should be completed in a reason-
able amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you should contact the Harbor Freight Tools Cus-
tomer Service Department at 1-800-444-3353.
Harbor Freight Tools Emission control defects Warranty Provisions
2. 1. Length of coverage
HFT warrants to a first retail purchaser and each subsequent purchaser that the engine is free from defects in materials and
workmanship that cause the failure of warranted parts for a period of two (2) years after the date of delivery to the first retail
purchaser.
3. 2. No charge Repair or Replacement
Repair or replacement of any warranted part will be performed at no charge to the owner if the work is performed through a warranty
station authorized by HFT. For emissions warranty service, contact the HFT Customer Service Department at 1-800-444-3353.
4. 3. consequential damages coverage
Coverage under this warranty shall also extend to the failure of any engine components caused by the failure of any warranted
part while it is still covered under this warranty.
5. 4. coverage Exclusions
Warranty claims shall be filed in accordance with the provisions of the HFT warranty policy explained in the box at the top of the
previous page. HFT shall not be liable for any loss of use of the engine, for any alternative usage, for any damage to goods, loss
of time, or inconvenience. Warranty coverage shall also be excluded for any part which fails, malfunctions, or is damaged due to
failure to follow the maintenance and operating instructions set forth in the Owner's Manual including, but not limited to:
Use of parts which are not authorized by HFT
a)
Improper installation, adjustment or repair of the engine or of any warranted part unless performed by an authorized war-
b)
ranty center
Failure to follow recommendations on fuel use contained in the Owner's Manual
c)
Improper or inadequate maintenance of any warranted parts
d)
Repairs performed outside of the authorized warranty service dealers
e)
Alterations by changing, adding to or removing parts from the engine.
f)
6. 5. Service and Maintenance
Component parts which are not scheduled for replacement as required maintenance or are scheduled only for regular inspection
to the effect of "repair or replace as necessary" are warranted for the warranty period. Any warranted part which is scheduled
for replacement as required maintenance is warranted for the period of time up to the first scheduled replacement point for that
part. Any replacement part, provided it is equivalent in durability and performance, may be used in performance of maintenance
or repairs. The owner is responsible for commissioning a qualified technician/mechanic to perform all required maintenance, as
outlined in the Inspection, Cleaning, and Maintenance section in this manual.
SKU 95960 For technical questions, please call 1-800-444-3353. Page 26