Chicago Electric 95960 Set Up, Operating, And Servicing Instructions page 12

2. The Engine MUST be filled with a high quality engine oil. If the Engine will be
run in temperatures above 32 degrees Fahrenheit, use SAE 30 weight oil. If the
Engine will be run in temperatures below 32 degrees Fahrenheit, use SAE 5W-30
weight oil.
3. To add engine oil, unscrew and remove the Oil Dipstick (65A). Pour engine oil into
the Dipstick Hole until the level of oil is even with the top edge of the Dipstick Hole.
Then, make sure to screw the Oil Dipstick back into its Dipstick Hole.
(See Figure d.)
4. To fill the Fuel Tank (31), unscrew and remove the Fuel Tank Cap (34). Fill the
Fuel Tank with mid-to-high octane unleaded gasoline. Then replace the Fuel
Tank Cap. Thereafter, check the Fuel Tank Gauge for the amount of unleaded
gasoline. When necessary, refill the Fuel Tank. (See Figure E.)
5. Periodically, check the Fuel Filter (32) for excessive dirt and debris. If necessary,
remove the Fuel Filter and clean with compressed air. (See Figure E.)
SKU 95960 For technical questions, please call 1-800-444-3353.
FuEL TANK (31)
FuEL TANK
GAuGE
FuEL vALvE (41)
FuEL TANK cAP (34)
FuEL FiLTER (32)
FiGuRE E
FiGuRE F
cHOKE LEvER (21A)
REv 07h
Page 12