Network - Planet ICA-601 User Manual

User Setup user name, password and login privilege
E-Mail Setup E-Mail configuration
This device is a client site and configure information to upload images to
FTP
server
Alarm output Setup alarm output action
Video Alert Setup Video alert action
Object detection Setup Object detection and Object tracking

3.5.1 Network

Use this menu to configure the network to connect the device and the clients.
This section provides the menu of connecting the device through Ethernet cable.
MAC address: Display the Ethernet MAC address of the device. Note that user cannot
change it.
Obtain an IP address automatically (DHCP): DHCP: Stands for Dynamic Host Configuration
Protocol. Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this device
cannot get an IP address within limited tries, the device will assign a default IP address,
192.168.0.20, by itself as the default IP address.
IP address, Subnet mask, Gateway, 1st DNS, 2nd DNS server: If you do not select Obtain
an IP address automatically, then you need to enter these network parameters by yourself.
IP Address: This address is a unique numbers that identifies a computer or device on the
WAN or LAN. These numbers are usually shown in groups separated by periods, for example:
192.168.0.200
Subnet Mask: Subnets allow network traffic between hosts to be separated based on the
network's configuration. In IP networking, traffic takes the form of packets. IP subnets advance
network security and performance to some level by organizing hosts into logical groups.
37/71