Physical Details - Planet ICA-601 User Manual

2.2 Physical Details

Identification of ICA-601 / ICA-651 cables
RJ-45 LAN
RS-485 & DI/DO (Connect to a TEL box)
1. RJ45 LAN socket:
Connect to PC or Hub/Switch. For connections to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5 "straight through" cable to connect the
ICA-601 / ICA-651 to a 100Mbps Fast Ethernet network switch or hub.
Note that, in case you need to connect the device to PC or notebook directly, you should use
cross over cable instead.
2. RS-485 & DI/DO:
Connect to a local keyboard controller and connect to sensor in and alarm out devices
Inside the TEL box:
Name Function
12VDC DC 12V (50mA maximum)
GND GND
D+ RS485 data +
D- RS485 data -
DI Digital signal input (for even trigger)
DO Digital signal output (for even trigger)
3. Local Video output (BNC port)
The Network Camera also provides composite video output. User can use BNC video cable to
connect the Network Camera with a TV monitor or VCR.
Video out
12V DC in
9/71
Line in
Line out