Table of Contents
Advertisement
Caution: Avoid possible injuries while carrying the reciprocating saw. Lock the Trigger
Switch in the off position by pressing in on the Trigger Switch Lock (14B).
3.
With the blade installed, press the Switch Lock to lock the Trigger Switch.
Squeeze the Trigger Switch. It should not move.
4.
After the Battery is charged, insert into the housing.
5.
To turn the saw on, press the Switch Lock in the opposite direction, then squeeze the
Trigger Switch.
6.
Prepare and secure the material to be cut.
Use the correct blade for the material being cut. Fine tooth blades are generally used
for cutting metal. Blades with larger teeth are generally used for cutting wood.
Properly support long items being cut so as to not pinch the blade, preventing
kickback and pending the blade.
7.
To begin cutting, firmly hold the saw handle with one hand, and the housing with the
other hand. Squeeze the Trigger Switch to start the cutting blade and rest the
Adjustable Pad on the material to be cut. Slowly lower the moving blade onto the
material.
8.
When the cut is complete, press in on the Switch Lock.
Caution: Avoid possible injuries, always remove the battery before making any adjust-
ments or changing blades.
1.
Insert the charged Battery (27C) into the Flashlight housing.
2.
Press the On/Off Switch (23C) to turn on.
3.
Push the Flashlight head to the desired angle.
4.
To replace the light bulb, unscrew the Lamp Cover Ring (3C) and
twist out the (18 V) Bulb (5C).
1.
Use only sharp bits and blades with these tools.
2.
Regularly inspect all mounting screws and knobs for tightness.
3.
Keep safety guards in good working order.
4.
Keep motor air vents clean of dust and debris. Vacuum periodically.
5.
Clean tools with a damp cloth and light detergent. Do not use solvents.
6.
Regularly charge batteries, whether used or not.
SKU 40056
40056 combo pack.p65
8
Flashlight Operation
The item numbers (in brackets) can
be found on the Flashlight Assembly
drawing and Parts List.
Maintenance
Page 8
(3C)
(23C)
(27C)
10/10/03, 10:11 AM
Advertisement
Table of Contents
