Table of Contents
Advertisement
Model:
Drive:
Brakes:
Batteries:
Electronic Control:
Safety Start:
Maximum Speed:
Charging Transformer:
Full Recharge:
Thumb-Action Speed Control:
Operating Temperature:
Weight:
Dimensions:
TORQUE SPECIFICATIONS
Handlebar binder bolt:
Stem binder bolt:
Stem-to-steerer binder:
Wheel axle nuts:
Rear Brake Retainer Nut:
Cap'n Billy's Whiz Bang
Belt
V-style front, 80 mm band brake rear. Levers have safety power cutoff switches
Dual 12 volt, 10 amp hr sealed lead acid
Current response power manager to optimize performance and battery life
3 MPH (5 KPH) Push to start required
13 MPH (20 KPH)
120 VAC 60 Hz @ 1 Amp Built-in self-regulating to prevent over-charging
Within 5 hours
Handlebar-mounted control operating at speeds above 3 MPH (5 KPH)
40 F (4.5 C) to 100 F (38 C)
50 Lbs. (22.7Kg)
51" long X 10" wide X 40" high (Maximum)
150-180 lb. in
170-200 kgf cm
175-260 lb. in
200-300 kgf cm
100-120 lb. in
115-140 kgf cm
130-210 lb. in
150-250 kgf cm
100-120 lb. in
115-140 kgf cm
11. Specifications
PAGE 37
Advertisement
Table of Contents
