Capin Billy's Whiz Bang Owner's Manual page 11

ATTACHING HANDLEBAR EXTENSION TO SCOOTER
1. Slide the Stem Slot onto the Ready-Hinge Tab.
2. Slide the Ready-Hinge Cover over the Stem Slot.
3. Raise the Stem (including the Handlebar) to the upright Position.
4. Slide the Ready-Hinge Cover down over the Ready-Hinge. The Detent Lock Button will hold the Ready-Hinge Cover in place.
5. Rotate the Ready-Hinge Cover until it stops – to tighten completely.
TO FOLD THE HANDLEBAR DOWN
1. Depress only the lower Detent Lock Button.
2. Rotate the Ready-Hinge Cover completely to loosen.
3. Slide the Ready-Hinge Cover up next to the upper Detent Lock Button.
4. Fold the Handlebar down.
Using the tire pump provided, inflate the tires to a pressure within the range marked on the tire.Tires with pressure closer
to the maximum listed in the range will improve performance by giving lower rolling resistance.
Check the brakes, cables and fittings for proper connections.
See Section 7,"MECHANICAL SAFETY CHECK."
Parking the Cap'n Billy's Whiz Bang Scooter Electric is easy and quick with its full-kickstand design, allowing the rider easy
access from either side.The full-kickstand also allows a more stable footing on difficult and uneven surfaces.
It is your responsibility to read – and to understand – this Manual. If you have even the slightest doubt as to
whether you understand something in this manual, talk to your Dealer or contact EWI at 1-408-270-3724 or
service@electricwheelsintl.com.
In the USA, you may call toll-free 1-888-808-4382.
PAGE 9