Riding Instructions - Capin Billy's Whiz Bang Owner's Manual

5. Riding Instructions

IMPORTANT NOTICE:
Your scooter is designed with a safety push-to-start feature.To prevent false starts, you must manually push-off to a
speed of about 3 mph before the throttle will power the scooter.The Thumb-Action Speed Control activates the motor
only when the scooter is in motion.
• Place both hands on the handlebar and push the scooter forward to release the kickstand.
• Lightly press the Thumb-Action Speed Control located on the right side of the handlebar.
• Place one foot near the center of the deck. Push off from the ground with the other foot to a speed of about 3 miles per hour.
The speed control will activate the motor only when the scooter is in motion.
• Place your other foot on the deck.
• To slow down, reduce your thumb pressure on the Thumb-Action Speed Control, or release it completely.
• To stop, remove your thumb from the throttle and squeeze both brake levers.
See Section 8C,"Brakes," for more information about using the hand brakes.
PAGE 13