IBM SCOD-3ZVQ5W Configuration And Options Manual page 532

Ibm eserver configuration and options guide
Table of Contents

Advertisement

Option
Number
System Management
03K9309
Advanced System Management Interconnect
14
Cable Kit
09N7585
Remote Supervisor Adapter
59P2984
Remote Supervisor Adapter II
39Y9566
Remote Supervisor Adapter II SlimLine
19
1519100
IXA Adapter
22P5888
PCI Parallel Port Adapter (low profile)
Remote I/O Expansion
-
Related I/O Cables
02R2068
Ultra320 Internal Single-drop 24in LVD SCSI
20
Cable
32P8164
External SCSI Interface Kit
10K3661
USB to Serial Adapter
Notes:
1.
Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the
frequency of the slowest adapter. 133MHz PCI-X adapters are backward compatible with 33/66MHz,
64-bit PCI-based servers.
2.
Hot-plug feature only supported in systems with Active PCI slots. For network operating system
support, point your browser to www.pc.ibm.com/us/compat.
3.
ServeRAID-6i+ Controller is a PCI-X adapter supporting both Ultra320 and Ultra160 HDDs in a
dedicated or mixed environment, allowing each HDD to perform at rated capacity. The adapter installs
into limited PCI slots and converts both channels of the integrated SCSI controller to RAID in conjunction
with the LSI 1030 chipset. Both standard and the optional SCSI HDD backplanes as well as internal tape
drives and external SCSI devices cabled directly to the onboard controller connectors. Supports up to
1,064MB/s data transfers across the PCI bus with 128MB ECC SDRAMM write-back cache with battery
backup. Supports RAID levels 0, 1, 10, 5, 50 and 1E. The option includes brackets for installation in both
low-profile and standard PCI slots. Internal and external tape drives are supported by ServeRAID-6i+
only when a second channel on the integrated controller is available and the RAID configuration
designates the second channel as a conventional SCSI bus. See system sections for supported tape drives.
4.
This adapter is designed using PCI-X technology.
5.
ServeRAID-6M (P/Ns 39R8816, 39R8815) are PCI-X adapters powered by a 600MHz Intel xScale
processor, providing 256MB or 128MB of ECC SDRAM battery-backed cache. The dual-channel Ultra320
controller includes two internal 68-pin connectors and two external 0.8mm VHDCI connectors,
supporting up to 14 HDDs on each channel at data transfer rates of up to 1,064MB/s. Supports RAID
levels 0, 1, 10, 1EO, 5, 50 and 5EE with both Ultra160 and Ultra320 HDDs.
6.
ServeRAID-7k is available for select systems, installs into a dedicated slot and does not consume a PCI
slot. It works in conjunction with the integrated SCSI controller providing the following RAID levels: 0,
00, 1, 10, 1E, 1E0, 5 and 50 with 256MB of ECC DDR1 battery-backed cache.
7.
ServeRAID-7t is a low-profile capable, four-port SATA controller supporting RAID levels 0, 1, 5 and 10.
All ports are internal. ServeRAID-7t is a universal PCI 2.2 compliant adapter powered by Intel's 400MHz
80302 I/O processor and has 64MB of cache.
524
COG
Description
13
15
17
Communications
-
21
22, 23
Adapter
PCI
Length
Support
-
-
Half
32-bit
Half
32-bit
18
-
-
Full
64-bit
Half
32-bit
-
-
-
-
-
-
-
-
Low-
PCI
profile
Hot-
Voltage
1
2
Capable
Plug
Key
-
-
-
-
Universal
-
-
Universal
-
-
-
-
3.3v
-
-
-
-
-
-
-
-
-
-
1
MHz
-
-
16
33
16
66
-
-
66
5
33
-
-
-
-
-
-
-
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents