Table of Contents
Advertisement
IBM Rack-Mounted Units
Storage Units:
EXP400
DS300
DS400
DS4100
DS4300
DS4400
DS4500
DS4000 EXP100
DS4000 EXP710
FC Switch 8-port
FC Switch 16-port
Tape Components:
NetBAY 1U Tape
Enclosure
NetBAY 4U Tape
Enclosure
SDLT/LTO Modular
Tape Library
Notes:
1.
Optional rack power cords: P/N 94G6667 - 14ft NEMA 5-15P; P/N 94G7448 - 14ft IEC 320-C14.
2.
1U = 1.75in (44.45mm).
3.
Weight equals maximum configuration, except for the 4559 Tape Enclosures where it is the weight
without tape drives.
4.
Power inlets are IEC 320-C14, except for the BladeCenter with 2000W power supplies and the x365,
which have IEC 320-C20 inlets.
5.
Rack installation requires appropriate tower-to-rack conversion kit.
6.
Additional power cords are not required. This power supply option shares use of line cords provided
with the base system. Should be ordered in pairs to maintain redundancy.
7.
If installed in older IBM racks, the server should not be installed behind a glass door that blocks air flow.
Remove the glass door or replace with an optional perforated door. To order a rack extension kit for
withdrawn IBM racks, visit the Options Continuation Program Website at www.pc.ibm.com/ww/ocp.
8.
Internal power supply logic limits low voltage (100-127 VAC) to 550w per power supply. Thus,
configurations requiring more power are not redundant for low voltage installations, e.g., configurations
with more than two processors.
17331RU
3
22
85
1701xxx
3
23
90
1700xxx
3
23
90
1724100
3
22
99
172260U
3
24
102
17421RU
4
24
85
174290U
4
24
85
171010U
3
23.5
89
1740710
3
23
101
3534F08
1
10
12
2005H16
1
12
12
3
45591UX
1
20
16
3
45594UX
4
18
25
4560SLX
5
31
70
352/440
2/2
391/558
1/2
391/558
2/2
273/390
2/2
275/390
2/2
140/200
2/2
140/200
2/2
245/350
2/2
273/390
2/2
85
1/1
200
2/2
100
1/1
300
1/1
300
1/1
Chapter 53. Rack cabinets and options
1
Standard Power Cords
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
465
Hide quick links:
Advertisement
Table of Contents
