IBM SCOD-3ZVQ5W Configuration And Options Manual page 245

System x3850 and xSeries 366 memory options
SBB Option
Number Number
39R9502 41Y5000
0001919 41Y5005
- 73P2866
- 73P2867
30R5147 -
39M5807 -
39M5810 -
39M5819 -
Note: Standard: 1 GB depending on server model, expandable to 32 GB. Type: 333 MHz, registered, ECC, PC3200
double data rate (DDR) II, SDRAM. Connectors: Two-way interleaved, four dual inline memory module
(DIMM) connectors per memory card. Maximum: Four memory cards, each card containing two pairs of single-
ranked PC3200 DDRII DIMMS.
Notes:
1. x3850 and x366 support Chipkill, memory mirroring, memory ProteXion technologies, hot-swap and
hot-add memory.
2. Supported memory DIMMs can coexist in the same server. However, memory DIMMs of the same
capacity must be installed in matched pairs.
3. One memory card comes standard. At least one memory card is required. A total of four memory cards
with four DIMM slots each, may be installed, allowing a total of 16 DIMMs per chassis.
4. This option kit includes the components necessary to upgrade systems that currently have single-core
Intel Xeon MP processors installed to support the dual-core Intel Xeon MP processors. Processors are not
included in the kit and must be purchased separately.
Table 43. Standard Memory Configuration
Model
1RY, 2RY, E2Y, E5Y, E6Y
E1Y
E7Y, EAY
Feature
Code
4338 4-DIMM DDR2 MEMORY CARD
1919 Dual Core X3 Upgrade Kit
- 2GB (2x1GB Kit) PC2-3200 CL3 ECC DDR2 SDRAM RDIMM (512Mb)
- 4GB (2x2GB Kit) PC2-3200 CL3 ECC DDR2 SDRAM RDIMM (512Mb)
0535 4GB PC2-3200R DDR2 CL3 ECC SDRAM RDIMM
0552 1GB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
0553 2GB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
0554 512MB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
2 x 1GB PC2-3200 CL3 ECC DDR-2 SDRAM RDIMM
4 x 1GB PC2-3200 ECC DDR-2 SDRAM RDIMM
8 x 1GB PC2-3200 ECC DDR-2 SDRAM RDIMM
1, 2
Memory Description
Memory Cards
3
4
Memory DIMMs
Std. DIMM Configuration
Chapter 19. System x3850 and xSeries 366
237