Table of Contents
Advertisement
Table 50. Datacenter Scalable Configurations
The Datacenter Scalable Solutions will contain, at a minimum, the components below in the appropriate
quantities. Additional Datacenter certified options are listed in the 'Additional Options' table. Required service
offerings are listed in the 'Required Service Offerings' table.
Option
Number
41Y5004
Scalability Enablement/Memory Adapter
41Y5005
Dual Core X3 Upgrade Kit
Select HDDs
26K5654
36.4GB 10K rpm 2.5" SAS HS HDD
26K5655
73.4GB 10K rpm 2.5" SAS HS HDD
40K1051
36GB 10K 2.5" SAS Hot-Swap HDD
40K1052
73GB 10K 2.5" SAS Hot-Swap HDD
Select the following
-
Ethernet Cable
Refer to the Required Service Offerings section at the end of the Datacenter section for any manufacturing
Note:
install fees that may apply.
Note:
A node represents a single instance of the operating system. For example, a single-node, 16-way configuration
will consist of one x3950 and three x3950 Es.
Notes:
1.
All final customer configurations and solutions require IBM Solution Assurance Approval.
2.
The Datacenter OS is not preloaded but is provided "in-box" with each Scalable DC model.
3.
Select one model to serve as the primary server. The OS will reside on this server.
4.
Select based on primary server selected. x3950 E COA must match the selected x3950 OS.
5.
Order both cables in quantities shown per configuration. Connects chassis in a node together for
scalability.
6.
x3950 Datacenter models ship standard with the maximum number of processors. The x3950 E has zero
processors standard.
7.
All processors in the solution must match. Select processors for x3950 E based on the processor installed
in the primary x3950. Select in quantities of four per x3950 E.
8.
This option is applicable for models 88727DY, 88727EY, 88728DY, 88728EY, 88743DY, and 88743EY only.
9.
Scalable x3950 Datacenter models have two 2GB DIMMs standard. x3950 E Datacenter models have zero
DIMMs standard. Minimum of two DIMMs (one option kit) equating to 4GB required per chassis. Each
chassis must contain the same memory configuration.
10. All Datacenter models ship standard with two memory cards. Each memory card supports four DIMMs.
Max of four cards are supported per chassis.
11. Memory can be installed using one of two methodologies: Performance installation or cost-effective
installation. Performance installation populates one pair of DIMMs per memory card, until four cards are
installed, before adding a second pair of DIMMs to a card. Cost-effective installation fully populates each
memory card before adding additional cards.
12. Single core Datacenter solutions containing greater than 16 processors require one Scalability
Enablement/Memory Adapter (P/N 41Y5004) per chassis. x3950 E dual core Datacenter solutions
containing 16 processors and greater require one Scalability Enablement/Memory Adapter (P/N
41Y5004) per chassis. Proof of the appropriate U.S. Government Export License must exist before this
option can be ordered or shipped to Tier 3 countries. In addition to providing scalability support, this
adapter supports four memory DIMMs and can be used in place of one of the standard, four-slot memory
adapters.
13. This option kit includes the components necessary to upgrade xSeries x3950 and x3950 E systems that
currently have single-core Intel Xeon MP processors installed to support the dual-core Intel Xeon MP
processors. Processors are not included in the kit and must be purchased separately. Once the system is
1
Description
13
14
8
8
15
(continued)
Total Qty
4-way
12
1
1
Min=2
-
-
-
-
1
Chapter 21. Datacenter solution program
Total Qty
Total Qty
8-way
16-way
2
4
2
4
Min=2
Min=2
-
-
-
-
-
-
-
-
2
4
Total Qty
32-way
8
8
Min=2
-
-
-
-
8
281
Hide quick links:
Advertisement
Table of Contents
