IBM SCOD-3ZVQ5W Configuration And Options Manual page 315

SBB Option Feature
Number Number Code
32R1849 26R0847 4294
32R1850 26R0849 4295
32R1938 32R1937 4362
32R1942 32R1941 4363
Notes:
1. This cable is 1.5m in length and provides four connections between the optical pass-thru-module (OPM)
and an external Ethernet or fibre environment.
2. Provides five copper connections between the copper pass-thru module (CPM) and an external gigabit
Ethernet environment. A maximum of 14 connections per CPM is supported. One CPM cable ships with
the CPM option. Two additional cables can be installed.
3. Option 39Y9170 can not be installed by manufacturing. It must be shipped separately as an accessory.
Figure 60. IBM BladeCenter Copper Pass-thru Module Cable
This IBM BladeCenter option provides connection between the copper pass-thru module and an external
environment. This cable allows up to five copper connections to blade servers. One of these cables included
with each copper pass-thru module. Cable is 3.1m (9.4ft) in length.
Description
InfiniBand 8 meter 4x
Cable for IBM eServer
BladeCenter
InfiniBand 8 meter 12 to
(3) 4x Cable for IBM
eServer BladeCenter
IBM CX4 1.5 Meter Cable
IBM CX4 3.0 Meter Cable
Connection Connection
Type From Type To
InfiniBand 4x
InfiniBand
InfiniBand 4x
InfiniBand
CX4 CX4
Connector Connector
CX4 CX4
Connector Connector
Chapter 24. BladeCenter
# of
Drop Connects Connects
s From To
1 IB 4x IB Fabric
connector
3 IB 12x IB Fabric
connector
1 10Gb Another
ESM CX4 Nortel
Port 10Gb ESM
or external
10Gb
switch
with CX4
ports.
1 10Gb Another
ESM CX4 Nortel
Port 10Gb ESM
or external
10Gb
switch
with CX4
ports.
®
T 8730
307