Setting Up; Installation Mode; Parts For Installation (Optional) - Panasonic PT-RZ475U Operating Instructions Manual

Setting up

Installation mode

There are six installation modes for the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 78) and
[COOLING CONDITION] (x page 79) according to the installation mode. Also set [COOLING CONDITION] correctly. Using the projector
with incorrect settings may shorten the life of light source.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Portrait setting and projecting from the rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]

Parts for installation (optional)

You can install the projector on the ceiling using the optional Ceiling Mount Bracket (Model No.: ET-PKR100H (for High Ceilings), ET-PKR100S
(for Low Ceilings), ET-PKR100P (for portrait)).
f Be sure to use the Ceiling Mount Bracket specified for this projector.
f Refer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector.
Attention
f To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualified
technician.
Chapter 2 Getting Started — Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Method
[FRONT/CEILING]
[CEILING SETTING]
Setting on a desk/floor and projecting forward
Method
[REAR/CEILING]
[CEILING SETTING]
Portrait setting and projecting forward
Method
[REAR/FLOOR]
[PORTRAIT SETTING]
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Method
[REAR/FLOOR]
[FLOOR SETTING]
Method
[FRONT/FLOOR]
[FLOOR SETTING]
Method
[FRONT/FLOOR]
[PORTRAIT SETTING]
ENGLISH - 27