Panasonic PT-RZ475U Operating Instructions Manual page 89

When using existing projector control commands
Set each item when controlling the projector from a computer using control commands of a previously purchased Panasonic projector. Existing
Panasonic projector control software and other software can still be used.
1) Press as to select [RS-232C].
2) Press the <ENTER> button.
f The [RS-232C] screen is displayed.
3) Press as to select [EMULATE].
4) Press the <ENTER> button.
5) Press as to select an item.
[DEFAULT]
[D3500]
[D4000]
[D/W5k SERIES]
[D/W/Z6k SERIES]
[L730 SERIES]
[L780 SERIES]
[L735 SERIES]
[L785 SERIES]
[F/W SERIES]
[LZ370]
[LB/W SERIES]
[VX500 SERIES]
[EZ570 SERIES]
[VW431D]
6) Press the <ENTER> button.
7) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f Refer to "<SERIAL IN> terminal" (x page 130).
f When [DIGITAL LINK] is selected, communication using that serial terminal is only available when the corresponding device (such as the
optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN> terminal.
f When transferring logos via the optional Digital Interface Box (Model No.: ET-YFB100G), "NO SIGNAL SLEEP" of ET-YFB100G must be set
to "OFF" to avoid cutting off communication.
f When [DIGITAL LINK] is selected, communication speed is fixed to 9 600 bps.
Chapter 4 Settings — [PROJECTOR SETUP] menu
RZ470 series, RW430 series, RZ370 series, RW330 series
D3500 series
D4000 series
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
DZ770 series, DW740 series, DX810 series, DW730 series, DX800 series, DZ6710 series, DZ6700
series, DW6300 series, D6000 series, D5000 series, DZ570 series, DW530 series, DX500 series
L730 series, L720 series, L520 series
L780 series, L750 series
L735 series
L785 series
FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
LZ370 series
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78
series, LB75 series
VW435N series, VW430 series, VX505N series, VX500 series, VW330 series, VX400NT series,
VX400 series, VX41 series
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
VW431D series
ENGLISH - 89