Important Safety Instructions - IDTECK Star RFL200 Quick Manual

1. Important Safety Instructions

When using Proximity Access Controller, basic safety precautions should always be followed to reduce
the risk of fire, electrical shock, and injury to persons. In addition, the following safety guides should also be
followed:
1. Fully read and understand all instructions and follow them completely.
2. Follow all warnings and instructions marked on the product.
3. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If necessary, use mild soap.
4. Do not use this product near water.
5. Only operate this product using the type of power source indicated. If you are not sure of the type of
power supplied to your installation site, consult your dealer of local power company.
6. Never insert objects of any kind into the product or through the cabinet slots as they may touch voltage
points and/or short circuit parts possibly resulting in fire or electric shock.
Never spill liquid of any kind on the product.
7. Never disassemble this product by yourself; take the unit to a qualified service center whenever service
or repair is required. Opening or removing the covers may expose you to dangerous voltages or other
risks. Also, incorrect reassembly can cause electric shock when the unit is subsequently used.
8. Unplug this product from the Direct Current (DC) power source and refer to qualified service personnel
under these conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled on the product.
c. If the product does not operate normally after following the operating instructions in this manual.
Adjust only those controls that are covered by the operating instructions in this manual. Improper
adjustment of other controls that are not covered by this manual may damage the unit and will
often require extensive work by a qualified technician to restore normal operation.
d. If the product exhibits a distinct change in performance.
2. General
The Star RFL200 / iPASS IP-RFL200 is an elegant looking and an attractive 4" read range proximity
reader built-in Proximity Single Door Access Controller which can be mounted to a metal door frame
(mullion) or to any flat wall surface. The Star RFL200 / iPASS RFL200 is epoxy potted that ensure you a
successful operation even in harsh environments. Using 512 key tag, not only controlling door but also
convenient registration or deletion.
When loosing a key tag, it is easy to reset. Therefore it is the safest controlling door device.
Two-color LED of green and red, internal Piezo buzzer sound will guarantee you an accurate and reliable
Door Access Operations.
3